BEGO VarseoSmile Crown Plus - 250g
By Bego
The VarseoSmile Crown plus material is used for 3D printing of permanent restorations such as single crowns, inlays, onlays, and veneers for anterior and posterior areas including occlusal surfaces.
| Color | A1, A2, A3, B1, B3, C2, D3 |
| Density | approx. 1.4 – 1.5 g/cm³ |
| Viscosity | 2,500 – 6,000 mPa∙s |
| Flexural strength | 116 – 150 MPa* |
| Flexural modulus | 4,090 MPa |
| Hardness | ≥ 90 Shore D |
| Water solubility | < 1 µg/mm³ |
| Water sorption | < 12 µg/mm³ |
| Layer thickness | 50 μm |
| Wavelength | 385 nm and 405 nm |