BEGO VarseoSmile Crown Plus - 250g
By Bego
$299.00
The VarseoSmile Crown plus material is used for 3D printing of permanent restorations such as single crowns, inlays, onlays, and veneers for anterior and posterior areas including occlusal surfaces.
| Color | A1, A2, A3, B1, B3, C2, D3 |
| Density | approx. 1.4 – 1.5 g/cm³ |
| Viscosity | 2,500 – 6,000 mPa∙s |
| Flexural strength | 116 – 150 MPa* |
| Flexural modulus | 4,090 MPa |
| Hardness | ≥ 90 Shore D |
| Water solubility | < 1 µg/mm³ |
| Water sorption | < 12 µg/mm³ |
| Layer thickness | 50 μm |
| Wavelength | 385 nm and 405 nm |